Tactical

RCBS Matchmaster Cuts Brass Prep Time to a Fraction

November 18, 2026

A reviewer at The Firearm Blog spent months running the RCBS Matchmaster Precision Case Trimmer on his reloading bench and came away calling it the best brass-trimming tool he's found for high-volume rifle reloading.

Snapshot

The TFB reviewer, who loads thousands of rounds a year for highpower rifle and other competitions, tested the RCBS Matchmaster against his usual Lyman Case Trim Xpress setup. He clocked the RCBS trimming over 600 cases per hour on both 5.56 and .308 brass, compared to roughly 204 per hour with his old Lyman tool.

Key points

  • Setup: The reviewer said assembly took about 20 minutes with basic hand tools, though adjusting the cutter for the first time took some trial and error.
  • Speed: In timed tests, he trimmed 100 pieces of Lake City 5.56 brass in 9:47 and 100 pieces of .308 brass in 9:18.
  • Works on primed brass: Because the Matchmaster indexes off the case shoulder rather than the flash hole, he noted it can trim brass that's already primed.
  • Caliber swaps: Changing bore diameters means repositioning the pilot and cutters, which the reviewer called the slowest part of the process. He said RCBS sells complete pre-set cutter heads per caliber to speed that up.
  • Shavings: He reported the included clear cover fills quickly with brass shavings during long runs, though he found the exposed cutter did not grab a glove during testing.

Quick take

The reviewer's main complaint was price, which he expects will be the sticking point for most buyers. He compared the decision to buying a premium chronograph: expensive for a single-purpose tool, but worth it if you'll use it enough. His conclusion was that serious reloaders looking to cut the pain out of brass prep will find this trimmer is the best tool yet for the job.

Read the full story: thefirearmblog.com